MKR WAN 1310

The Arduino MKR WAN 1310 provides a practical and cost effective solution to add LoRa® connectivity to projects requiring low power. This open source board can connect to the Arduino IoT Cloud, your own LoRa® network using the Arduino LoRa® PRO Gateway, existing LoRaWAN® infrastructure like The Things Network, or even other boards using the direct connectivity mode.

Main Features

The MKR WAN 1310 brings LoRa® connectivity to your projects. Using the popular Arm® Cortex®-M0 32-bit SAMD21 processor, it also features the powerful Murata CMWX1ZZABZ module and the ECC508 crypto-chip for security. The board is part of the MKR family, where you can choose from a large variety of shields to build projects out of the box with minimal effort!

Cortex-M0 32-bit SAMD21

The powerful, low-power processor that is used in all MKR Family boards.

Datasheet

Murata CMWX1ZZABZ

Use the LoRa® wireless protocol for your own networks, or connect to various LoRaWAN® networks, such as The Things Network.

Datasheet

ATECC508 crypto chip

The ECC508 crypto chip makes sure your data remains secure and private, and can store up to 16 keys in an EEPROM array.

Datasheet

Tech Specs

Here you will find the technical specifications for the Arduino MKR WAN 1300.

Please read: operating voltage is 3.3V

The microcontroller on the this board runs at 3.3V, which means that you must never apply more than 3.3V to its Digital and Analog pins. Care must be taken when connecting sensors and actuators to assure that this limit of 3.3V is never exceeded. Connecting higher voltage signals, like the 5V commonly used with the other Arduino boards, will damage the board.

Please read: black conductive foam

You should remove the black conductive foam from the board pins before usage. If you don't remove it, the board may behave erratically.

Board	Name	Arduino® MKR WAN 1310
	SKU	ABX00029
	Compatibility	MKR
Microcontroller	SAMD21 Cortex®-M0+ 32bit low power ARM MCU
USB connector	Micro USB (USB-B)
Pins	Built-in LED Pin	6
	Digital I/O Pins	8
	Analog Input Pins	7 (ADC 8/10/12 bit)
	Analog Output Pins	1 (DAC 10 bit)
	PMW Pins	13 (0 - 8, 10, 12, A3, A4)
	External interrupts	10 (0, 1, 4, 5, 6, 7, 8 ,9, A1, A2)
Connectivity	LoRa	Murata CMWX1ZZABZ
	Carrier frequency	433/868/915 MHz
	Region	EU/US
	Secure element	ATECC508A
Communication	UART	Yes
	I2C	Yes
	SPI	Yes
Power	I/O Voltage	3.3V
	Input Voltage (nominal)	5-7V
	DC Current per I/O pin	7 mA
	Supported battery	Li-Po Single Cell, 3.7V, 1024mAh Minimum
	Battery connector	JST PH
	Lowest power consumption	104uA
Clock speed	Processor	48 MHz
Clock speed	RTC	32.768 kHz
Memory	SAMD21G18A	256KB Flash, 32KB SRAM
Memory	Murata CMWX1ZZABZ	192KB Flash, 20KB RAM
Dimensions	Weight	32 g
	Width	25 mm
	Length	67.6 mm

Compatibility

Software & Cloud

The following software tools allow you to program your board both online and offline.

Hardware

The hardware listed below is compatible with this product.

shields

MKR Connector Carrier

MKR IoT Carrier

MKR Motor Carrier

Essentials

First Steps

Quickstart Guide

All you need to know to get started with your new Arduino board.

Suggested Libraries

MKRWAN

The MKRWAN library allows you to use the Murata LoRa® transceiver, and has examples on connecting to The Things Network, sending and receiving packets, and how to set the frequency band for your region.

LoRa

A library for sending and receiving data using LoRa® radios.

ArduinoLowPower

The ArduinoLowPower library allows you to use the low power features of the SAMD21 MCU to minimize power consumption and maximize battery duration.

Arduino Basics

Built-in Examples

Built-in Examples are sketches included in the Arduino IDE and demonstrate all basic Arduino commands.

Learn

Discover interesting articles, principles and techniques related to the Arduino ecosystem.

Language References

Arduino programming language can be divided in three main parts: functions, values (variables and constants), and structure.

Tutorials

LoRa® LED Control with MKR WAN 1310

Learn how to connect two boards using LoRa®, and how to control an LED remotely from another board.

IoT

LoRa®

LED

LoRa® Message Service with MKR WAN 1310

Learn how to use the Serial Monitor to send messages between two MKR WAN 1300 boards using LoRa® technology.

IoT

LoRa®

Send Data Using LoRa® with MKR WAN 1310

Learn how to setup a continuous stream of data between two devices using LoRa® technology.

IoT

LoRa®

LoRa® Sensor Data with MKR WAN 1310

Learn how to send environmental data with LoRa® using two MKR WAN 1310 and a MKR ENV shield.

IoT

LoRa

Environmental data

LoRaWAN® Regional Parameters in the Arduino® MKRWAN 1310

Learn how to set up specific LoRaWAN® regional parameters in the LoRa® module of the Arduino® MKR WAN 1310 board using the Arduino MKRWAN library.

LoRaWAN®

Regional parameters

MKR WAN 1310

MKRWAN

MKRWAN Examples

Examples for the MKRWAN library, which is used to communicate with the LoRa® module onboard the MKR WAN 1300/1310 boards.

LoRa

WAN

Connecting MKR WAN 1310 to The Things Network (TTN)

Learn how to set up an account on The Things Network (TTN) and test if your board can connect to it.

IoT

LoRa®

The Things Network

MKR WAN 1310 with MKR GPS Shield

Learn how to record GPS data and send it using LoRa® technology, using two MKR WAN 1310s and a MKR GPS shield.

IoT

LoRa®

GPS

Resources

Interactive Viewer

Interact with the schematics, the PCB and a 3D model of the product.

Open Viewer

Pinout Diagram

A diagram showing the functions and the arrangement of the pins on your product.

Open Diagram

Downloads