Usually, when we work on building electronic circuits projects, we use breadboards, especially when prototyping. When we have finished the prototyping stage, we often need to migrate our projects from a breadboard to a dedicated board, like printed circuit boards (PCBs), to have our project safely and for a long time. It is in these cases when we need to know how to solder electronic parts or components.
Soldering is a process where two electronic parts or components are joined together by melting solder around an electrical or/and mechanical connection between those components using a handheld tool called soldering iron. Solder creates a solid and permanent electrical and mechanical bond between the electronic components after it cools.
For mastering soldering, we need practice, a lot, but also good tools. Let's first talk about the essential tools and materials we need to start soldering.
A soldering iron is the fundamental piece of handheld equipment used in the process of soldering. Soldering irons heat up to melt solder around electrical or mechanical connections; as it melts, solder flows into the spaces between and around two components. Once bonded, the solder is left to cool and harden, creating a permanent and conductive join; it can melt back into liquid form by reheating enough the join. The process of reheating and separating a previously soldered joint is called desoldering.
A soldering station is a more advanced and professional type of soldering iron with a separate temperature control unit; soldering irons provide just one fixed heat setting while soldering stations offer a range of specific temperatures. Soldering stations provide a far greater degree of accuracy for heat-critical applications.
15W to 30W pen-style soldering irons are a good start for beginners.
Nowadays, most soldering irons have interchangeable and replaceable tips, sometimes also referred to as bits. There are many different types and variations of soldering tips, each one used for specific purposes and with particular advantages or disadvantages in its use. The most common and standard tips used in soldering irons are the conical tip and the chisel tip. Let's talk about these types of soldering tips:
Finding the best tip for soldering jobs can be tricky. Conical and chisel tips should be enough for soldering standard through-hole and surface-mount electronic components for starters.
One of the most significant causes of soldering problems is poor tip maintenance. It is essential to take good care of your soldering tips to increase their overall longevity and reduce the need for regular replacement.
Using a sponge will help keep soldering iron tips clean by removing oxidation (oxidated tips will get black and not accept solder). Conventional wet sponges work for cleaning soldering iron tips, but they tend to shorten the lifespan of the tips due to thermal shock. Also, wet sponges drop, temporarily, the temperature of the tip when wiped.
A better alternative are brass sponges for cleaning soldering tips. Brass sponges removes debris in tips better; they have a smaller thermal shock and they don't need water as conventional sponges.
Solder is a metal alloy that melts to create a permanent bond between electrical parts or components. Solder comes in both lead and lead-free presentations, also in different diameters; the most common diameters used are 0.8mm and 1.5mm. Inside the solder core a material known as flux helps improve electrical contact and mechanical strength of solder.
For electronics soldering, the most commonly used solder is lead-free rosin core solder. This type of solder consists of a tin and a copper alloy. Leaded rosin core solder is also widely used, but it's becoming less popular due to health concerns with lead.
When using solder, make sure to have proper ventilation and to wash your hands after soldering.
A helping hand, also called "third hand," is a device that can assist you while soldering by holding the parts or components you are trying to solder, leaving your hands free to work.
Now that we know about the essential tools and materials used for soldering, let's get into soldering. Before we can start, we need to prepare our soldering iron tip by tinning it with solder, this should be always the first step. Tinning is a process that helps to improve heat transfer from the soldering iron to the electronic part or component we want to solder; it also helps to protect the soldering tip against oxidation.
Let's begin by making sure our soldering tip is attached correctly to our soldering iron, then turn it on and let it heat up. If you use a soldering station, set the temperature to 400° C (or 752° F). When the soldering iron, or soldering station, is heated up and ready:
Remember to tinning the soldering iron tip before and after every soldering session. Tinning is a good practice that can increase soldering tip life.
Now, let's solder a resistor to a circuit board. For this process, it’s recommended to use a helping hand or other type of clamp device like a vice. Let's start with mounting the resistor to the circuit board. Insert the resistor into the holes of the circuit board.
Then, flip the circuit board and bend its leads outwards 45°.
Touch the copper pad and one of the resistors leads simultaneously, hold the soldering iron in place to heat the joint formed by the pad and the resistor lead for three to four seconds.
Apply solder to the joint while holding the soldering iron on the copper pad and the resistor lead. Avoid applying solder directly to the soldering tip; the joint should be hot enough to melt the solder.
When there is enough solder in the joint, remove the soldering iron and let it cool down naturally. Once cool, snip the extra wire from the resistor lead. Avoid bad joints by blowing on the solder and not allowing it to cool down naturally. Repeat this process with the other resistor lead and the rest of the components of the circuit.
Good solder joints are smooth, shiny, and have a volcano-like shape. Good solder joints also have enough solder to cover the entire joint but not too much to spill it.
Working with electric circuits also involves working with wires; let's learn how to solder them. For soldering wires, it's also recommended to use a helping hand or another type of clamp device:
Use heat shrink to cover connections between wires.
What happens if we want to remove a solder joint? Or if we're going to change it to correct? Or what about removing a component from a circuit board. Solder joints can be removed or changed easily by reheating and separating them; this is named desoldering. To desolder a joint, we will need desoldering braid, also known as solder wick.
Using desoldering braid is simple:
Be careful while using a soldering braid because it will get hot.
If you have a lot of solder, using desoldering braid may not be the best option. In this case, a device called solder sucker is a better option. A solder sucker is a handheld mechanical vacuum that sucks up hot solder, usually by pressing a button.
Using a solder sucker is also simple:
Designing custom circuits with Arduino® boards is easily done using Proto Shields. For example, The MKR Proto Shield is a prototyping shield designed for the MKR family boards. This shield easily plugs onto any MKR board using its provided female/male headers and offers a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1” (2.54mm) grid.
Another example is the MKR SD Proto Shield. This shield allows you to easily connect a microSD card to an MKR family board; in this shield, there's also a small prototyping area for soldering components.
Check out the documentation of the MKR SD Proto Shield for more information, tutorials and resources.